|
Anoma - Nilien nghiên cứu huấn luyện |
||||
Tài Liệu Hàm Thụ
home |
Hình thức và hiệu lệnh tập họp Sự tập họp
cần phải nhanh chóng và có hình thức đẹp. Người điều khiển phải báo trước
cho đoàn sinh biết các hiệu lệnh bằng còi, miệng, tay, chuông, đèn, v.v... Hình thức tập họp Hình thức tập họp gồm: Các thế cá nhân và Các cách xếp
hàng A. Thế nghiêm: Đứng thẳng, hai tay thẳng theo mình, gót chân chạm vào nhau, hai bàn chân mở ra thành một góc vừa 60 độ. B. Thế nghỉ: Chân phải đứng nguyên chỗ, bỏ chân trái ra độ khoảng 30cm, hai tay để sau lưng, ở trong hàng không nói chuyện (nữ đứng tự nhiên hai tay vòng phía trước). C. Thế nghỉ tự do: Như thế nghỉ thường nhưng có thể nói chuyện nho nhỏ. D. Thế nghỉ có gậy: Đứng thế nghỉ, tay phải nắm gậy đưa thẳng ra theo vai. E. Thế chào: Đứng thẳng như thế nghiêm tay phải bắt ấn cát tường. F. Thế chào có gậy: Đứng như thế nghiêm tay trái đưa ngang bụng nắm lấy gậy, tay phải bắt ấn cát tường. II. các cách sắp hàng A. Một hàng dọc: Đứng đầu là Đoàn trưởng, cách 3 bước tới
Đội trưởng Đội I. Cách Đội trưởng một bước tới các Đội sinh, cách nhau
bằng tay dơ ra. Mỗi Đội cách nhau hai bước. Sau chót là Đoàn phó cách ba
bước. Trong mỗi Đội, Đội phó đứng sau cùng. C. Một hàng ngang: Đoàn trưởng đứng ở bên khoảng giữa các Đội, các khoảng cách cũng giống một hàng dọc. D. Hình rẽ quạt: Lấy Đoàn trưởng làm trung tâm, các Đội trưởng đứng theo hình cung, cách ba bước. Đội sinh nhắm theo Đội và Đoàn trưởng đứng thẳng hàng. Rẽ quạt mở rộng hay hẹp tùy theo lệnh người điều khiển. E. Hình chữ U: Lấy Đoàn trưởng là mức, từ vai đi về phía trước mặt Đoàn trưởng, các Đội đứng thành hình chữ U. Khoảng cách như hàng dọc. Người điểu khiển có thể cho đứng cách đều hết cả bằng một cách tay. Cách sắp hàng này có thể coi như biến chuyển từ cách sắp hai hàng dọc. F. Hình chữ nhật: Lấy Đoàn trưởng làm trung tâm, các Đội đứng thành hình chữ nhật. Khoảng cách như hàng dọc hay cách đều theo lệnh người điều khiển. Có thể coi như từ cách sắp chữ U biến thành. G. Hình bán nguyệt: Lấy Đoàn trưởng làm trung tâm, các Đội đứng thành nửa vòng tròn. Khoảng cách như hàng dọc hay cách đều theo lệnh. Tương tự hình chữ U, hình bán nguyệt như dẫn xuất từ cách sắp hai hàng dọc. H. Hình vòng tròn: Lấy Đoàn trưởng làm tâm điểm, các Đội, Chúng tiếp theo thứ tự chạy vòng tròn theo chiều kim đồng hồ. Khi vòng đã thành, Đoàn sinh đứng lại theo lệnh Đoàn trưởng. Khoảng cách như hàng dọc, hay cách đều theo lệnh. Trong các cách sắp hàng, Đoàn phó thường đứng sau Đoàn sinh, đối diện Đoàn trưởng. Hiệu lệnh tập họp Dự lệnh: là lệnh ra trước để Đoàn sinh chú ý chuẩn bị. Động lệnh: là lệnh để cho Đoàn sinh thi hành ngay mọi động
tác. Dự lệnh: nói trước cho đoàn sinh biết những gì sẽ phải làm, dự lệnh phải chậm rãi, rõ ràng dể hiểu. Động lệnh: nói ra để các em đoàn sinh thi hành ngay, động
lệnh phải mạnh mẽ, rõ ràng, dứt khoát. III. Thủ lệnh: (lệnh ra bằng tay) IV. hiệu lệnh bằng chuông, mõ, đèn V. cờ hiệu
|
FORMATIONS AND COMMANDS
Formations should be done quickly and should be done in an orderly
fashion. The person in command should first inform members of the
commands through whistle, voice, hand, bell, light, etc.
FORMATIONS
A. Reserved Position: stand straight, both hands straight along the sides, heels touch, feet open at a 60 degrees angle B. Ready Position: heels do not touch, feet 30 centimeters apart, males put hands in the back, females put hands in the front C. Resting Position: same as Ready Position, but little talking is allowed D. Ready Position with Flag Stick: stand in Ready Position, right hand hold stick at a 30 degrees angle with the shoulders E. Salute Position: stand in Reserved Position, right hand make wisdom seal salute. F. Salute Position with Flag Stick: stand in Reserved Position, left hand pull stick to the left, right hand make wisdom seal salute. II. GROUP FORMATIONS (see attached pictures) A. One vertical line assembly: The Group (Team) I Leader stands in front of the line by three steps away from the Unit Leader. The other members of the line will stand in line behind the Group Leader by one step or one full arm. Each Group will be two steps apart. The Unit Assistance Leader will stand in the back by three steps. In each Group, the Group Assistance Leader will be the last person. B. Multiple-vertical lines assembly: Same as one vertical line assembly, however, each Group will be apart by 2 straight arms. This distance can be adjust accordingly by the environment. C. One horizontal line assembly: The Unit Leader stands besides in the middle of the Groups, the distance is the same as one vertical line assembly. D. Fan assembly: The Unit Leader will be the center point, the Group Leaders stand in the semi-oval figure by three steps apart. Other group members line up with the Group Leaders and the Unit Leader. Fan assembly dimension wide or narrow depends on the person in command. E. U assembly: The Unit Leader will be the focal point, from the shoulder towards the front of the Unit Leader, the Groups stand in the U figure. The distance is same as one vertical line assembly. The person in command can order the Groups to stand equally by one arm. This formation can be recognized as the variation of the two-vertical lines assembly. F. Rectangular assembly: The Unit Leader will be the focal point, the Groups stand in the rectangular figure. The distance is same as one vertical line assembly or equally apart by the order of the person in command. This formation can be recognized as the variation of the U-assembly. G. Semicircle assembly: The Unit Leader will be the focal point, the Groups stand in the semicircle figure. The distance is same as one vertical line assembly or equally apart by the order of the person in command. Semilar to the U-assembly, this formation can be recognized as the variation of the two vertical lines assembly. H. Circular assembly: The Unit Leader will be the focal point, the Groups in the order will run to form the circle by the clockwise. When the circle is formed, the members stopped by order of the Unit Leader. The distance is same as one vertical line assembly or equally apart by the order of the person in command. In all of the formations, the Unit Assistance Leader always stands at the very last position, facing the Unit Leader.
COMMANDS
II. ORAL COMMAND
III. PHYSICAL (HANDS) COMMAND B. One horizontal line assembly: The person in command holds the right arm straight out--parallel to the shoulder, hand closed (Picture 2). C. One vertical line assembly: The person in command holds the right arm straight forward and slightly above the head, hand closed with the index finger pointing upward (Picture 3). D. Circular assembly: The person in command folds both arms in front. When the circle is formed, put the arms down to notify members to stop moving (Picture 4). E. Rectangular assembly: The person in command makes two "U’s" with the both the right and left arms, hands closed (Picture 5). F. Multiple-vertical lines assembly: Same as one vertical line assembly, however, the person in command may point two, three, or four fingers upward to indicate the number of vertical lines required. When all five fingers are pointed, all members must assemble in the appropriate or assigned lines (Picture 6).
G. U assembly: The person in command makes a "U", using the right arm,
with the shoulder and head; hand closed (Picture 7).
IV. COMMANDS USING BELL, WOODEN GONG, & LIGHT
V. FLAG SIGNALS
|
||